plate No. 1 which are stamped, we extract the blocks A and B of the chalupa.Pulimos both pieces with sandpaper fine-grained , and painted red.
apply glue and fix the parts A and B distributed and centered on the main deck beams, as shown in the picture.
prepared four straps crude wire 0.5 mm in diameter and four 4-mm pulley, we conducted a knot around each pulley.
put one lug at each end of the wedges we have placed in the previous step and tying a strap pulley block in each of them.
recovered the boat we built in earlier stages of assembly. Apply glue to the upper profiles of the blocks, A and B, we put the boat on blocks with the bow is oriented toward the bow of the boat.
http://211060.guetbook.motigo.com 
0 comments:
Post a Comment