In this picture we can see how the boat is already finished rails in the absence of coating. 
Then go over every contour of the rails port and starboard with sandpaper very fine grained and painted black. 
will cut a piece of ribbon sapelli 2 x 2 mm to the same length as the rail. Glue the ribbon centered on the rail so as to cover the upper ends of the pilarotes. In the next step then it ends rowing arem the starboard railing. 
introduce pilarotes ends of the holes in the lid of the gift. Use tweezers to guide pilarotes to get fit into the relevant holes. Once positioned correctly the rail, apply to pinpoint some quick-drying glue in the joints of the pieces. 
Cojeremos nine columns of wood, is cut off the bases and and paint with them we will prepare pilarotes the rail. Apply fast-drying glue at the ends of the pilarotes and into the holes of the lath. The ends of the pilarotes should be flush with the bar and not exceed it. 
will present the bar centered on the port gunwale top of the poop. With a restrained hand, and the other will practice the same holes on the top of the gift. Ensuring that the bar does not move so they are distributed as in the lid. 
With the help of a hand drill and a drill of 2 mm in diameter, almost new holes centered and distributed over the bar. Start in the middle and distribute the other to the ends, given that the latter must remain at a distance of 5 mm from the end. 
To develop the rail of the poop, port, cut a piece of ribbon sapelli 2 x 4 mm to the same length from the top of gunwale of the poop. Present above the bar gives cover to check. http://211060.guetbook.motigo.com 
